Skip Navigation
duraflame Crackleflame® 3-hr Indoor / Outdoor Firelog
4.5 lb
This is a carousel with one large image and a track of thumbnails. Select any of the image buttons to change the main image. The large image can be enlarged further using the zoom button by the main image.
    Item images, which may include product information when available. When available, product details, ingredients, or nutritional information will be provided in screen reader compatible form below.
    Garden duraflame Crackleflame® 3-hr Indoor / Outdoor Firelog hero

      duraflame Crackleflame® 3-hr Indoor / Outdoor Firelog

      4.5 lb
      Details
      Directions

      Product information

      Details

      duraflame® Crackleflame® Indoor/ Outdoor 3-hr Firelog. Burn away the stress with the soothing crackling sounds of a wood fire. These gorgeous firelogs crackle just like traditional wood fires, but without the “pop” you get with wood.

      • Lights quickly – full flames in less than 5 minutes

      • Burns 80% cleaner than wood

      • Use in an indoor, open hearth fireplace or outdoor fireplace or fire pit

      • Chimney Safety Institute of America Accepted Product

      Directions

      Lighting instructions:

      Indoor fire:

      For use in all types of open-hearth fireplaces.

      Open fireplace damper before lighting firelog.

      Carefully pull outward on the seam of the wrapper (without tearing) to loosen it from the log and create an air space.

      Place firelog (only one) on supporting grate with arrows pointing down and seam facing room.

      Light the seam below each arrow. Close fireplace screen.

      Outdoor fire:

      For use in outdoor fireplaces, fire pits, fire bowls, chimeneas and campfires.

      Firelog(s) should be burned on a grate in an outdoor fireplace or on a bed of sand in a chimenea or fire pit. Do not burn with wood or any other materials.

      Carefully pull outward on the seam of the wrapper (without tearing) to loosen it from the log and create an air space.

      Place one firelog in base of fireplace/fire pit with the seam on the side of the log and the lighting arrows pointing down.

      A second firelog may be added, if desired, after the first firelog has been burning for about 2 hours and flames have begun to diminish. Carefully place the second log diagonally across the first log (with seam on the side of the log). Do not disturb, move or break up the existing firelog when adding the second log. Do not burn more than 2 logs at a time.

      If you are using a clay chimenea, follow initial instructions above, but burn only one firelog. Two firelogs may be too hot for many chimeneas and could result in the clay cracking.

      Use in open, well ventilated area. Avoid prolonged, direct exposure to smoke.


      Warnings

      Safety instructions: Instructions: for a safe and long-burning fire, follow instructions carefully. Open fireplace damper before lighting firelog. Burn firelog on supporting grate toward the back of fireplace. Grates with bar spacing greater than three inches do not provide adequate support and may result in firelog breakage, flare-up, and/or reduced burn time. Do not burn firelogs on andirons. Burn only one firelog at a time, and never add anything to an existing firelog fire. Do not burn firelog with any other materials. Close wire mesh protective fire screen when burning firelog. Always leave fireplace glass doors open while firelog is burning unless fireplace manufacturer's instructions indicate otherwise. Never leave any fire unattended. Do not allow children or pets to play near fire. Always make sure the log is completely extinguished (no flame or smoke) before leaving the house or going to bed. Logs that are not completely extinguished can produce smoke after the flames go out. Carefully break up the firelog with a fireplace poker at the very end of the burn when a small flame is still present. This should allow any remaining log material to burn out. Store out of reach from children and pets. Not suitable for human or animal consumption. Caution-risk of fire: The Duraflame firelog is designed to light easily with a match or butane utility lighter. Do not use flammable liquids, fire starters, or fireplace gas log lighters to ignite firelog. Do not poke a burning firelog with fireplace tools unless the fire is almost out. Poking or breaking up a burning firelog in the first 2 hours after lighting can cause the firelog to become extremely flammable and result in sudden flare-up. Flaming particles may stick to tools. Do not place wood or any other items on a burning firelog. To extinguish firelog in an emergency, use UL listed dry chemical fire extinguisher or carefully douse fire with water. Do not close fireplace damper until ashes are cool. Dispose of cool ashes in garbage. Not suitable for use in gardens. Do not use in wood stoves or barbecues. Do not use for roasting marshmallows or other cooking. Burning this manufactured firelog results in emissions that can expose you to chemicals including carbon monoxide, soot, smoke and other combustion by-products, which are known to the State of California to cause cancer, birth defects or other reproductive harm, and/or other adverse health effects. For more information go to www.p65warnings.ca.gov.

      Product information or packaging displayed may not be current or complete. Always refer to the physical product for the most accurate information and warnings. For additional information, contact the retailer or manufacturer. *Actual weight may vary based on seasonality and other factors. Estimated price is approximate and provided only for reference.